$ 6.00
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
The listing is for a personalized car decal. I print with an eco solvent printer on outdoor adhesive vinyl, it is not vinyl that is layer upon layer.
Message me if you have any questions.
$ 23.00
You will receive a baby blue onesie with a baseball embroidery design & with the name customized in navy blue.
Sizes
Newborn
3-6
9-12
18
24
Need to rush your order? https://www.etsy.com/listing/186240323/rush-my-order
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 25.00
Super cute unisex fit Bella Canvas tee.
****Put in notes at checkout the color tee you want.
Red,black,light grey, navy,purple,kelly green, royal blue, maroon, dark grey, neon yellow
PM me if you have questions.
This is your tee, I want you to ❤️ it!
The design is printed vinyl.
Size chart is the photos.
100% cotton
.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 24.00
The listing is for a soft Bella Canvas short sleeve v-neck tee with a baseball style number on the front of the tee. The baseball number is printed with an eco solvent printer.
Size chart in photos.
100% Cotton
All sales are final unless it is an error on my part.
Several tee colors available.
IF you prefer a tank or a different color tee, PM me.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 24.00
You will receive a navy trucker hat with an Applique Texas with baseball laces.
The back of the hat has a velcro closure.
This is a unisex fit hat.
Please message me if you have any questions or if you would like a different hat color or style.
$ 22.00
You will receive a grey trucker hat with a fabric baseball appliqué as shown in the photos. The hat has a Velcro closure.
$ 30.00
I love this new baseball design... It is super cute and not the average baseball mom tee.
This listing is a Bella Canvas Unisex tee with appliqué and embroidery.
52 cotton/48 poly
This is also a great gift idea.
Please see measurements in the photos as all sales are final.
The fit is unisex, which runs larger than ladies fit.
Need to rush your order? https://www.etsy.com/listing/186240323/rush-my-order
$ 10.00
you will not receive anything in the mail. you will receive an email with an SVG & EPS. You must know how to use your cutter. You can only sell this on finished products. You many not sell this as a download in any way.$ 32.00
You will receive a 3/4 zip unisex navy pullover with the Believe Vacations in white embroidery as a chest size logo. Shipping is 1-2 weeks. No returns or exchanges, please refer to size chart in photos.$ 6.00
WHAT'S INCLUDED: Big OR little
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 25.00
Put in notes at checkout please- Monograms are in order from left to right: first name initial, last name initial, middle initial.
$ 29.00
Super cute unisex fit black triblend Bella Canvas v-neck tee. Triblend is a super soft not thick tee.
The design is silver glitter and buffalo plaid. The buffalo plaid is fabric.
Size chart in photos
50 poly/25 cotton/25 rayon
See turn around time in my description/about my shop tab.
$ 32.00
Super cute unisex fit Bella Canvas tee.
PM me if you have questions.
This is your tee, I want you to ❤️ it!
Size chart is the photos.
100% cotton
$ 19.00
You will receive a customized black distressed hat with buckle closure.
You have options of thread color and wording.
This is a customized made to order hat, no returns,refunds or exchanges.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer only.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
You will receive a 12”x18” of adhesive outdoor grade print vinyl.
You will need transfer tape, you have the option either way at check out. If you do a lot of vinyl, it is cheaper to buy it from your local vinyl dealer or company in a roll.
$ 9.99
These patterned bottle coolers are the perfect accessory for any regular beer bottle, it can also squeeze over some soda bottles. The 3mm neoprene is excellent quality and feels great while keeping your drink cold and your hands warm!$ 40.00
The top decal is removable so that you can change it as your child’s taste changes.
The Names vinyl is non positional & outdoor grade
This listing will include the vinyl design for the top of trunk and name for the front.
The printed vinyl is 27"wide x 13" tall which can be slightly adjusted for a better fit depending on your trunk choice. (I would need to know this in notes at checkout)
The name for the front of the trunk will be in WHITE
The name will be 3" tall.
$ 40.00
The top decal is removable so that you can change it as your child’s taste changes.
The Names vinyl is non positional & outdoor grade
This listing will include the vinyl design for the top of trunk and name for the front.
The printed vinyl is 27"wide x 13" tall which can be slightly adjusted for a better fit depending on your trunk choice. (I would need to know this in notes at checkout)
The name for the front of the trunk will be in WHITE
The name will be 3" tall.
$ 24.00
You will receive a custom color choices Bride trucker hat with a velcro closure.
In the notes at checkout please note what color thread you would like & I will do my best to match it.
1-Bride thread color
2-heart thread color
3-embellishment thread color
$ 9.50
WHAT'S INCLUDED:
HTV - heat transfer vinyl. I use high quality Stahl's vinyl.
small= small plaid design
large-large plaid design
large plaid squares are 2"
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
*****Do not mirror design when cutting.
After cutting & weeding----
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
You can sell finished items with the transfers.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
WHAT'S INCLUDED:
HTV design
approx.10" wide
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
You can sell finished items with the transfers.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 20.00
Please choose if you want a short sleeve, long sleeve or sweatshirt.
Design is heat transfer vinyl printed with eco solvent ink.
The tees are Bella Canvas & the sweatshirt is Gildan Premium.
Tees are both 100% cotton
sweathirt is pre-shrunk 75/25 ringspun cotton/polyester
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 25.00
You will receive a black trucker hat with white back & stitching. The hat has a Velcro closure. The Texas is embroidered onto the hat.
$ 30.00
Listed is a royal blue Bella brand (soft) unisex hoodie.
Size chart is listing in photos
colors may be slightly different than photo.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 27.00
Soft unisex raglan with glitter. This is unisex, not ladies fit.$ 23.00
Sizes
Newborn
3-6
9-12
18
24
Colors
White.Grey.Light Blue.Navy.
Need to rush your order? https://www.etsy.com/listing/186240323/rush-my-order
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 6.00
WHAT'S INCLUDED:
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 25.00
Super cute unisex fit Bella Canvas in triblend in Maroon. Triblends tee are super soft and not thick.
In the personalization please put the state you would like.
Size chart in photos
50 poly/25 cotton/25 rayon
See turn around time in my description/about my shop tab.
$ 25.00
Monograms are in order from left to right: first name initial, last name initial, middle initial.
$ 9.00
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
$ 20.00
Please choose if you want a short sleeve, long sleeve or raglan.
Design is heat transfer vinyl printed with eco solvent ink if you choose the black shirts or it is direct to garment on the white body raglan.
They are Bella Canvas
Tees are both 100% cotton & raglan is 50/50. Fit is unisex-true to size
$ 24.00
This listing is a white Comfort Colors hat customized with your school or monogram & 2 thread color choices.
The back of the hat is a buckle, see the 3rd photo.
$ 6.00
WHAT'S INCLUDED:
HTV - heat transfer vinyl. I use high quality Stahl's vinyl.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
*****Do not mirror design when cutting.
After cutting & weeding----
Masking Process
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm
Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene
Care Instructions
Machine wash inside-out using mild detergent.