You will receive the transfer not the finished shirt, this is for mock up purposes only.
Ready to press heat transfer.
you can sell finished items with it.
** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1
Step 1: Remove mask from liner.
Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.
Step 3: Remove design from carrier by pulling at a 90 degree angle.
Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.
Wait 5 Seconds, Peel Warm
100% Pre-Shrunk Cotton
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.