Buffalo Plaid HTV Transfer

WHAT'S INCLUDED:
HTV - heat transfer vinyl. I use high quality Stahl's vinyl.
small= small plaid design
large-large plaid design

large plaid squares are 2"

** You must use masking tape - https://www.etsy.com/listing/636476974/htv-masking-tape?ref=shop_home_active_1

*****Do not mirror design when cutting.

After cutting & weeding----

Masking Process
Step 1: Remove mask from liner.

Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.

Step 3: Remove design from carrier by pulling at a 90 degree angle.

Step 4: Place masked design back on liner until ready to heat apply.
Save the mask liner to use with the masked design.

You can sell finished items with the transfers.

Application Instructions
Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm

Material/Fabric Compatibility
Cotton
100% Pre-Shrunk Cotton
Polyester
Poly/Cotton Blends
Lycra®/spandex
Polypropylene

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.


Collections:


Pin It